Mark Levinson No. 585 Integrated Amplifier
Up for sale is a must mint like new ML #585 with low hours. This unit has zero blemishes‚ remote still has plastic on it. Comes with all original accessories and packaging.
Output Power: 200W RMS per channel @ 8 O‚ 20Hz – 20kHz
Damping Factor: 400 @ 20Hz‚ referred to 8 O
Frequency Response: 20Hz – 20kHz‚ ±0.13dB; 2Hz – 250kHz‚ +0.2dB/–3dB
Signal-to-Noise Ratio: 98dB (20Hz – 20kHz‚ unweighted); 103dB (20Hz – 20kHz‚ A-wtd)‚ referred to full output – maximum volume setting
Voltage Gain: 40.7dB (maximum volume setting)
Total Harmonic Distortion: 45k O (RCA & XLR)
Input Overload: 5.5V RMS (RCA & XLR)
PREAMPLIFIER SECTION: DIGITAL
Sample Rates/Bit Depth: PCM: 32kHz‚ 44.1kHz‚ 48kHz‚ 88.2kHz‚ 96kHz‚ 176.4kHz‚ 192kHz/up to 32-bit; DSD: Native‚ single- and double-speed
GENERAL
Analog Audio Connectors: 3 pairs single-ended inputs (RCA); 1 pair balanced inputs (XLR); 1 pair single-ended line outputs (RCA); 1 pair loudspeaker outputs ("Hurricane" binding posts w/banana sockets that accept spade lugs with 1/4" (6.3mm) spacing up to 1/8" (3mm) thick)
Digital Audio Connectors: 1 balanced AES/EBU input (XLR); 2 coaxial S/PDIF inputs (RCA); 2 optical inputs (Tos-Link); 1 asynchronous USB input (USB-B)
Control Connectors: 1 RS-232 port (RJ-12 connector); 1 IR input (1/8" phone jack); 1 programmable 12V DC trigger output (1/8" phone jack)‚ 100mA maximum; 1 programmable 12 DC trigger input (1/8" phone jack); 1 Ethernet port (RJ-45 connector)
Mains Voltage: 100V AC‚ 115V AC‚ or 230V AC (factory-set)
Power Consumption: Maximum 1000W (power on)
Unit Dimensions (H x W x D): 6.9" (175mm) – without feet; 7.59" (193mm) – with feet x 17.25" (438mm) x 19.95" (507mm)
Packaging Dimensions (H x W x D): 19" (483mm) x 26" (660mm) x 26" (660mm)
Weight: 72 lb (32.6kg) – net; 96 lb (43.4kg) – with packaging